nodata

PRODUCT

Coconut shell pellet production line

Output (kg/h)2200 - 3000 kg/h

 

Applicable IndustriesManufacturing Plant, Farms, Home Use, Energy & Mining
 

VoltageCustomised


Supply Ability: 500 Set/Sets per Month

 
 

Product introduction

Pelletizing Process of the complete wood pellet production line:

1. Chipping&Crushing:


In the wood pellet plant before raw materials are made into biomass pellets, they are first reduced into much smaller, uniformly-sized particles. When the thickness is larger than 10 mm or size is greater than 50*50 mm, a wood chipper is needed to chip these materials into smaller pieces. The hammer mill is then used to further crush these small pieces into particles of less than 3 mm in diameter.


2. Drying:

After raw materials are crushed a dryer is needed since most raw wood materials have a moisture content of about 50%. However, the optimal moisture content for pelletiztion is 13%-15%. Therefore a rotary dryer is included in the wood pellet plant to reduce the moisture content. After crushing and drying you can begin making wood pellets.

3. Pelletizing:

After crushing and drying the raw material properly it is then ready for the pellet mill. The pelletizing machine or press is the key piece of machinery in the wood pellet plant. It should be mentioned that impurities in the raw materials like metal or stone,may damage the die and rollers of wood pellet making machine.

4.Cooling:

Usually after pelletizing, the temperature of wood pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purposes, a cooler must be used to reduce their surface temperature and moisture content.

5. Packing:

Finally is the packing process. In order to protect the wood pellets becoming getting damp and to increase storability, proper packing is necessary. Here we provide you with the best domestic Semi-Auto Packing Machine.

 

Raw Materials and cases

Henan Afuruika Machinery Equipment Co. , Ltd     Henan Afuruika Machinery Equipment Co. , Ltd                            

 

Technical Parameters

 

Below is the main process to make biomass pellets. If you want to get more information about the whole complete pellet line, please contact us directly for detailed optimal project 

1. Crushing Section

 

Name: Hammer Mill/Crusher

Usage:  Crush the wood chips/wood shaving/small blocks/grass/stalk...to 6-8mm
powder.

Finished products: 6-8mm(depends on the size of screener hole.)

                                                    Henan Afuruika Machinery Equipment Co. , Ltd
                                           Henan Afuruika Machinery Equipment Co. , Ltd

2. Drying Section

 

Name: Rotary Dryer

Usage:  dry raw material into suitable moisture to produce high-level pellets.

Finished moisture: 10-15%

3. Pelletizing Section

 

Name: Wood Pellet Machine

Usage:  press crushed and dry sawdust/rice husk/straw/grass... into pellets.

Finished pellets: 6/8/10mm.(Asian Market standard: 8mm; European Market
standard: 6mm)

                                                   Henan Afuruika Machinery Equipment Co. , Ltd
                                      Henan Afuruika Machinery Equipment Co. , Ltd

4. Cooling Section

 

Name: Cooling Machine

Usage:  cool high-temperature pellets before packing.

Reason: the finished pellets are very hot and realease moisture as
they leave the pellet machine. This section can ensure to generate smooth pellets.

5. Packing Section

 

Name: Packing Machine

Usage:  Pack pellets into 20-50kg/bag or 1 ton bag.

Advantage: easily to be transported to final users' site.

                                                        Henan Afuruika Machinery Equipment Co. , Ltd

 

Successful project

Related Products

Please write what you need,we will contact you asap!

Please leave a message
and we'll get back to you.

x
Home Whatsapp Inquiry